United States: Eastern District Predicts "Bare Metal Defense" Available Under Pennsylvania Law

Judge Eduardo C. Robreno of the United States District Court for the Eastern District of Pennsylvania recently addressed the novel issue of whether Pennsylvania recognizes the so-called "bare metal defense" in the context of an asbestos case.1 The court predicted that if the Pennsylvania Supreme Court considered the bare metal defense, it would rule that under Pennsylvania law, a manufacturer (or supplier) in Pennsylvania is not liable in strict liability for asbestos-containing parts that it neither manufactured nor supplied, even if it knew those parts would be used with its products. However, the court went on to rule that a manufacturer can be liable in negligence if it knew that asbestos parts would be used with its product, knew asbestos was hazardous, and failed to provide a warning that was adequate and reasonable under the circumstances.2 In other words, the court predicted that the manufacturer does have a common law duty to warn of the hazards of aftermarket component parts even though the manufacturer never made or had any control over the manufacture of the parts.

In Schwartz, the decedent-plaintiff ("Plaintiff") was employed as an airplane propeller mechanic and crew chief from 1957 to 1967 at two Air Force bases in Pennsylvania. Defendant Pratt & Whitney ("Defendant") manufactured airplane engines. When installed, the engines were insulated, often with asbestos-containing insulation manufactured by another company. Plaintiff was diagnosed with mesothelioma allegedly caused by asbestos exposure and died in February 2006. Plaintiff did not allege that Defendant manufactured or supplied the asbestos-containing insulation, but rather, that Defendant knew or should have foreseen that its engines would be used with asbestos-containing insulation. Plaintiff alleged that Defendant failed to warn about the anticipated dangerous use of asbestos insulation with its engines and was therefore liable for the alleged resulting harm.

The court looked to the Restatement (Second) of Torts § 402A, which has been adopted by Pennsylvania courts. Under Section 402A, a manufacturer can be liable in strict liability for harm caused by its product if the product is expected to, and does, reach the user without substantial change.3 The court's decision in Schwartz turned on the court's interpretation of both the term "product" and the phrase "substantial change." The court found that "product" refers to the discrete part produced by the manufacturer, prior to the addition of any asbestos-containing components.4 The court further held that the addition of an asbestos-containing component would always constitute a "substantial change" to the manufacturer's product.5 The effect was to bar all strict liability claims under the bare metal defense.

As a result, the court granted Defendant's summary judgment motion, barring all strict liability claims. The court further granted summary judgment as to the negligence claims, finding that while Defendant knew its products would be used with asbestos-containing insulation, it was unaware at the time of the hazards of asbestos.

The court's holding in Schwartz will allow manufacturers of products that were subsequently used with asbestos containing parts—such as gaskets, packing, or external insulation—to assert a defense against strict liability claims in asbestos cases. However, the decision in Schwartz still allows for plaintiffs to succeed in proving liability under a theory of negligence where it can be shown that the defendant knew of the hazards of asbestos and had knowledge that its product would be used with hazardous asbestos-containing materials.

Judge Robreno's decision is not binding in Pennsylvania state courts. In addition, it is based on a number of policy decisions that he believes represent the state of the law in Pennsylvania. Whether the ruling in Schwartz will be adopted by the trial and appellate courts in Pennsylvania will depend on future arguments by plaintiffs and defendants challenging or supporting the rationale set forth in the opinion.


1  Schwartz v. Abex Corp., et al., MDL-875, E.D. PA Civil Action No. 2:05-CV-02511-ER, 2015 U.S. Dist. LEXIS 68074 (E.D. Pa. May 27, 2015).

2 Id. at *3-*4.

3 Restatement (Second) Torts § 402A.

4 "[T]he Court finds that, when applying Section 402A, Pennsylvania law would construe the term 'product' such that an aftermarket component part is not the manufacturer's 'product.' . . . [T]he concept of 'strict liability,' as commonly understood, precludes such liability for the product manufacturer when the asbestos injury was caused by asbestos in the aftermarket component part—a part that was never in the control of the product manufacturer." Schwartz, 2015 U.S. Dist. LEXIS 68074, at *74-*75.

5 "[T]he Court predicts that, when applying Section 402A, Pennsylvania law would hold that, as a matter of law, replacement of original component parts (and/or addition of a component part such as external insulation) constitutes a 'substantial change' to the manufacturer's product, for purposes of strict liability." Id. at *76-*77 (emphasis in original).

If you have any questions about this Alert, please contact Sharon L. Caffrey, Kenneth M. Argentieri, Meghan E. Claiborne, any of the attorneys in our Products Liability and Toxic Torts Practice Group or the attorney in the firm with whom you are regularly in contact.

Disclaimer: This Alert has been prepared and published for informational purposes only and is not offered, nor should be construed, as legal advice. For more information, please see the firm's full disclaimer.

To print this article, all you need is to be registered on Mondaq.com.

Click to Login as an existing user or Register so you can print this article.

In association with
Related Topics
Related Articles
Up-coming Events Search
Font Size:
Mondaq on Twitter
Mondaq Free Registration
Gain access to Mondaq global archive of over 375,000 articles covering 200 countries with a personalised News Alert and automatic login on this device.
Mondaq News Alert (some suggested topics and region)
Select Topics
Registration (please scroll down to set your data preferences)

Mondaq Ltd requires you to register and provide information that personally identifies you, including your content preferences, for three primary purposes (full details of Mondaq’s use of your personal data can be found in our Privacy and Cookies Notice):

  • To allow you to personalize the Mondaq websites you are visiting to show content ("Content") relevant to your interests.
  • To enable features such as password reminder, news alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our content providers ("Contributors") who contribute Content for free for your use.

Mondaq hopes that our registered users will support us in maintaining our free to view business model by consenting to our use of your personal data as described below.

Mondaq has a "free to view" business model. Our services are paid for by Contributors in exchange for Mondaq providing them with access to information about who accesses their content. Once personal data is transferred to our Contributors they become a data controller of this personal data. They use it to measure the response that their articles are receiving, as a form of market research. They may also use it to provide Mondaq users with information about their products and services.

Details of each Contributor to which your personal data will be transferred is clearly stated within the Content that you access. For full details of how this Contributor will use your personal data, you should review the Contributor’s own Privacy Notice.

Please indicate your preference below:

Yes, I am happy to support Mondaq in maintaining its free to view business model by agreeing to allow Mondaq to share my personal data with Contributors whose Content I access
No, I do not want Mondaq to share my personal data with Contributors

Also please let us know whether you are happy to receive communications promoting products and services offered by Mondaq:

Yes, I am happy to received promotional communications from Mondaq
No, please do not send me promotional communications from Mondaq
Terms & Conditions

Mondaq.com (the Website) is owned and managed by Mondaq Ltd (Mondaq). Mondaq grants you a non-exclusive, revocable licence to access the Website and associated services, such as the Mondaq News Alerts (Services), subject to and in consideration of your compliance with the following terms and conditions of use (Terms). Your use of the Website and/or Services constitutes your agreement to the Terms. Mondaq may terminate your use of the Website and Services if you are in breach of these Terms or if Mondaq decides to terminate the licence granted hereunder for any reason whatsoever.

Use of www.mondaq.com

To Use Mondaq.com you must be: eighteen (18) years old or over; legally capable of entering into binding contracts; and not in any way prohibited by the applicable law to enter into these Terms in the jurisdiction which you are currently located.

You may use the Website as an unregistered user, however, you are required to register as a user if you wish to read the full text of the Content or to receive the Services.

You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these Terms or with the prior written consent of Mondaq. You may not use electronic or other means to extract details or information from the Content. Nor shall you extract information about users or Contributors in order to offer them any services or products.

In your use of the Website and/or Services you shall: comply with all applicable laws, regulations, directives and legislations which apply to your Use of the Website and/or Services in whatever country you are physically located including without limitation any and all consumer law, export control laws and regulations; provide to us true, correct and accurate information and promptly inform us in the event that any information that you have provided to us changes or becomes inaccurate; notify Mondaq immediately of any circumstances where you have reason to believe that any Intellectual Property Rights or any other rights of any third party may have been infringed; co-operate with reasonable security or other checks or requests for information made by Mondaq from time to time; and at all times be fully liable for the breach of any of these Terms by a third party using your login details to access the Website and/or Services

however, you shall not: do anything likely to impair, interfere with or damage or cause harm or distress to any persons, or the network; do anything that will infringe any Intellectual Property Rights or other rights of Mondaq or any third party; or use the Website, Services and/or Content otherwise than in accordance with these Terms; use any trade marks or service marks of Mondaq or the Contributors, or do anything which may be seen to take unfair advantage of the reputation and goodwill of Mondaq or the Contributors, or the Website, Services and/or Content.

Mondaq reserves the right, in its sole discretion, to take any action that it deems necessary and appropriate in the event it considers that there is a breach or threatened breach of the Terms.

Mondaq’s Rights and Obligations

Unless otherwise expressly set out to the contrary, nothing in these Terms shall serve to transfer from Mondaq to you, any Intellectual Property Rights owned by and/or licensed to Mondaq and all rights, title and interest in and to such Intellectual Property Rights will remain exclusively with Mondaq and/or its licensors.

Mondaq shall use its reasonable endeavours to make the Website and Services available to you at all times, but we cannot guarantee an uninterrupted and fault free service.

Mondaq reserves the right to make changes to the services and/or the Website or part thereof, from time to time, and we may add, remove, modify and/or vary any elements of features and functionalities of the Website or the services.

Mondaq also reserves the right from time to time to monitor your Use of the Website and/or services.


The Content is general information only. It is not intended to constitute legal advice or seek to be the complete and comprehensive statement of the law, nor is it intended to address your specific requirements or provide advice on which reliance should be placed. Mondaq and/or its Contributors and other suppliers make no representations about the suitability of the information contained in the Content for any purpose. All Content provided "as is" without warranty of any kind. Mondaq and/or its Contributors and other suppliers hereby exclude and disclaim all representations, warranties or guarantees with regard to the Content, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. To the maximum extent permitted by law, Mondaq expressly excludes all representations, warranties, obligations, and liabilities arising out of or in connection with all Content. In no event shall Mondaq and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use of the Content or performance of Mondaq’s Services.


Mondaq may alter or amend these Terms by amending them on the Website. By continuing to Use the Services and/or the Website after such amendment, you will be deemed to have accepted any amendment to these Terms.

These Terms shall be governed by and construed in accordance with the laws of England and Wales and you irrevocably submit to the exclusive jurisdiction of the courts of England and Wales to settle any dispute which may arise out of or in connection with these Terms. If you live outside the United Kingdom, English law shall apply only to the extent that English law shall not deprive you of any legal protection accorded in accordance with the law of the place where you are habitually resident ("Local Law"). In the event English law deprives you of any legal protection which is accorded to you under Local Law, then these terms shall be governed by Local Law and any dispute or claim arising out of or in connection with these Terms shall be subject to the non-exclusive jurisdiction of the courts where you are habitually resident.

You may print and keep a copy of these Terms, which form the entire agreement between you and Mondaq and supersede any other communications or advertising in respect of the Service and/or the Website.

No delay in exercising or non-exercise by you and/or Mondaq of any of its rights under or in connection with these Terms shall operate as a waiver or release of each of your or Mondaq’s right. Rather, any such waiver or release must be specifically granted in writing signed by the party granting it.

If any part of these Terms is held unenforceable, that part shall be enforced to the maximum extent permissible so as to give effect to the intent of the parties, and the Terms shall continue in full force and effect.

Mondaq shall not incur any liability to you on account of any loss or damage resulting from any delay or failure to perform all or any part of these Terms if such delay or failure is caused, in whole or in part, by events, occurrences, or causes beyond the control of Mondaq. Such events, occurrences or causes will include, without limitation, acts of God, strikes, lockouts, server and network failure, riots, acts of war, earthquakes, fire and explosions.

By clicking Register you state you have read and agree to our Terms and Conditions