India: Rules Governing Flying Of Drones / Remotely Piloted Aircrafts In India

Last Updated: 9 November 2018
Article by Rupesh Gupta

The Office of the Director General of Civil Aviation ('DGCA'), Government of India, has issued the much-awaited Civil Aviation Requirements ('CAR') considering the use of Remotely Piloted Aircraft ('RPA') by civilians for several purposes including but not limited to surveys for infrastructure monitoring. A remotely piloted aircraft, its associated remote pilot station(s), command and control links and related components form a Remotely Piloted Aircraft System (RPAS). CAR is issued under the provisions of Rule 15A and Rule 133A of the Aircraft Rules, 1937.

RPA is defined as an unmanned aircraft, which is piloted from a remote pilot station. Looking at the definition, a drone (commonly known term) will be an RPA under the provisions of CAR.

RPA is also deployed for multifarious imminent needs in technologically advanced world such as aerial surveys, commercial goods delivery, commercial photography, traffic monitoring, aerial damage assessment etc. DGCA recognized the need to encourage as well as regulate the use of UAS in India and accordingly formulated the CAR. CAR is scheduled to be effective from December 1, 2018.

Key features of CAR that will enable the companies, authorities and civilians to legally use drone/RPA in India are as follows:

Categories of RPA

Civil RPA is categorized in accordance with Maximum All-Up-Weight (including payload) as indicated below:

  1. Nano: Less than or equal to 250 grams.
  2. Micro: Greater than 250 grams and less than or equal to 2 kg.
  3. Small: Greater than 2 kg and less than or equal to 25 kg.
  4. Medium: Greater than 25 kg and less than or equal to 150 kg.
  5. Large: Greater than 150 kg.

Application Process

For RPA imported in India

Any entity intending to import RPAs in India will be required to obtain Equipment Type Approval (ETA) from WPC Wing, Department of Telecommunication ('DoT') for operating in de-licensed frequency band(s). Such approval shall be valid for a particular make and model.

The applicant shall apply to DGCA for import clearance as per the form provided with the CAR. This rule will not apply to Nano category RPAs. Based upon the import clearance issued by DGCA, Directorate General of Foreign Trade ('DGFT') shall issue license for import of RPAS.

Upon receipt of import license, the applicant shall apply to DGCA for Unique Identification Number ('UIN') or Unmanned Aircraft Operator Permit ('UOAP'), as applicable.

For RPAs locally purchased in India

The applicant shall obtain ETA from WPC Wing, DoT for operating in de-licensed frequency band(s). Such approval shall be valid for a particular make and model. The applicant shall submit information as per the format given with CAR along with application for issue of UIN / Unmanned Aircraft Operator Permit ('UAOP'), as applicable.

All applications will be processed on case-to-case basis through "Digital Sky Platform".

Requirements for Issue of Unique Identification Number (UIN)

A Civil RPA shall require Unique Identification Number (UIN) from DGCA. UIN will be granted where the RPA is wholly owned either:

  1. By a citizen of India; or
  2. By the Central Government or any State Government or any company or corporation owned or controlled by either of the said Governments; or
  3. By a company or a body corporate provided that:

    1. it is registered and has its principal place of business within India;
    2. its chairman and at least two-thirds of its directors are citizens of India; and,
    3. its substantial ownership and effective control are vested in Indian nationals; or
  4. By a company or corporation registered elsewhere than in India, provided that such company or corporation has leased the RPAs to any organization mentioned in (b) or (c) above.

In order to obtain UNI, documents that are listed in Rule 6.2 will be required to be submitted by the applicant to DGCA along with duly filled application (through Digital Sky Platform), as per Annexure IV provided with CAR and a fee of INR 1000/-. Besides general and equipment related documents, security clearance from MHA is mandatory in case of above mentioned (a), (c) & Indian company or corporate leasing RPAs from a company or corporate registered elsewhere than in India under 6.1, (d) not earlier than five years from date of application for UIN.

FAQ issued by DGCA points out that foreigners are currently not allowed to fly drones in India. For commercial purpose, they need to lease RPAs to an Indian entity who in-turn will obtain Unique Identification Number (UIN) and UAOP from DGCA.

A citizen of India shall either obtain security clearance from MHA or submit self-attested copies of at least two out of three valid identity proofs viz. Passport, Driving License or Aadhar Card. The requisite form for security clearance has been provided with CAR.

In case the documents are in order, the UIN shall be issued in 02 working days.

Exemption of requirement to obtain UIN will apply to :

  1. RPAs in Nano category intended to fly upto 50 feet (15 m) above ground level in uncontrolled airspace/ enclosed premises for commercial / recreational / R&D purposes.
  2. RPAs owned / operated by National Technical Research Organization, Aviation Research Centre and Central Intelligence Agencies.

Requirements for Issue of Unmanned Aircraft Operator Permit (UAOP)

In addition to obtaining UIN, all Civil RPA operators, other than those mentioned herein below, shall require UAOP from DGCA:

  1. A Nano RPA operating below 50 feet (15 m) above ground level in uncontrolled airspace/ enclosed premises.
  2. Micro RPA operating below 200 feet (60 m) above ground level in uncontrolled airspace / enclosed premises. However, the user shall intimate to local police office 24 hours prior to the conduct of actual operations.
  3. RPA owned and operated by National Technical Research Organization, Aviation Research Centre and Central Intelligence Agencies. However, the agency shall intimate local police office and concerned ATS Units prior to the conduct of actual operations.

Application for Issuance of UAOP

A duly filled application as per the format provided with CAR along with requisite fees of INR 25,000/- has to be submitted to DGCA, through Digital Sky Platform, at least 7 working days prior to actual commencement of operations. The documents to be annexed will include:

  1. A Standard Operating Procedure detailing the procedure and mandates enumerated in CAR;
  2. Permission of the land/property owner (only for area used for take-off and landing of RPA);
  3. Details of remote pilot(s) along with security clearance from MHA or self-attested copies of at least two out of three valid identity proofs viz. Passport, Driving License or Aadhar Card and copies of training records;
  4. Insurance details (as applicable);
  5. Security programme as approved by Bureau of Civil Aviation Security ('BCAS').

In case the documents are in order, the UAOP shall be issued in 07 working days.

A UAOP is valid for a period of five years from the date of issue, non-transferrable and renewal shall be subject to fresh security clearance from MHA.

Security / Safety Requirements

The operator shall be responsible for the safe custody, security and access control of the RPAs and in case of loss of RPA, the operator shall report immediately to the local police office, BCAS and DGCA.

The operator of all RPA categories (except Nano RPA) shall be responsible for notifying any incident/ accident involving RPA to the Director of Air Safety, DGCA as per format made available with CAR.

In case, the RPA is damaged and cannot be restored to original condition, the same shall be notified to DGCA by the owner/ operator for cancellation of UIN. The RPAs operator shall ensure that all security measures as enumerated in the Security Programme (approved by BCAS) are in place before the operation of each flight.

The ground control station (while in use or in store) shall be secured from sabotage or unlawful interference.

The RPAs (issued with UIN) shall not be sold or disposed-off in any way to any person or firm without permission from DGCA.

Any changes in the contact details specified in UIN shall be immediately notified to DGCA and all other concerned agencies.

Remote Pilot Training Requirements

Remote pilot should have attained 18 years of age, passed 10th exam in English, and should have undergone ground/ practical training. Ground training can be obtained through any DGCA approved Flying Training Organization (FTO). The practical training shall comprise of RPA in flight having live component, and/ or simulated flight training to demonstrate control of RPA throughout its operating conditions, including safe recovery during emergencies and system malfunction.


The requirements for Remote Pilot Training Requirements are not applicable for Nano and Micro category RPA pilots intending to operate in uncontrolled airspace. However, the owner and user shall be fully aware of responsibilities for all aspects of flight safety during such operations.

RPAs Maintenance Requirements

Besides maintaining and repairing RPAs as per manufacturer's approved procedures, a UAOP holder is also required to maintain records of each RPA flight as per format provided with CAR and make such records available to the DGCA on demand.

Equipment Requirements

All RPAs (except for Nano category intending to operate up to 50 feet (15 m) above ground level in uncontrolled airspace/ enclosed premises), are required to be equipped with specified serviceable components/ equipment. Indian Air Force will monitor movements of RPAs in the country in coordination with Airports Authority of India.

Operating Requirements

A Standard Operating Procedure as per the relevant sections of Aeronautical Information Publication has to be prepared by an RPA Operator. All RPA operations shall be restricted to day only, within Visual Line of Sight (VLOS), subject to following conditions:

  1. RPA operations, except those in enclosed premises, shall be conducted only when the following meteorological conditions exist:

    1. During daylight (between sunrise and sunset).
    2. In Visual Meteorological Conditions (VMC) with a minimum ground visibility of 5 km and cloud ceiling not less than 1500 feet (450 m).
    3. Surface winds of not more than 10 knots or as specified by the manufacturer.
    4. No precipitation (rain, hail or snow) or thunderstorm activities, or exceeding those specified by the manufacturer.
  2. The RPA operator [except Nano category intending to operate up to 50 feet (15 m) above ground level in uncontrolled airspace/ enclosed premises] shall obtain permission before undertaking flight through 'Digital Sky Platform'.
  3. All RPA operators [except Nano and Micro category intending to operate up to 50 feet (15 m) above ground level and 200 feet (60 m) above ground level respectively in uncontrolled airspace/ enclosed premises] are required to file flight plan at least 24 hours before actual operations and obtain following:

    1. ATC briefing, Meteorological (MET) briefing, and ATC clearance from the nearest ATC Unit
    2. Air Defense Clearance (ADC) from the nearest IAF Unit
    3. FIC Number from the Flight Information Centre (FIC) concerned.
  4. All RPA operators (except Nano RPA operating below 50 feet), shall inform the concerned local police office in writing prior to commencing the operations.

Operating Restrictions

CAR further specifies the areas within which an RPA shall be flown keeping in mind the security and safety protocols. It cannot be flown from a mobile platform such as a moving vehicle, ship or aircraft and over eco-sensitive zones around National Parks and Wildlife Sanctuaries notified by Ministry of Environment, Forests and Climate Change without prior permission. RPAs are restricted from carrying out aerial photography/remote sensing survey over restricted areas specified in CAR. Although DGCA may authorize such operations on case-to-case basis subject to approval of Ministry of Defense. In such a case, application shall be submitted to the Director Regulations & Information, DGCA (seven copies) in the prescribed format as indicated at Annexure-XI.

Minimum Standards for Manufacturing of RPAs (Both Indian & Foreign)

CAR further stipulates the minimum standards for manufacturing of Small and above categories of RPAs. For all categories of RPAs, except Nano, the manufacturer has to provide a Certificate of Compliance along with No Permission-No Takeoff compliance to DGCA.

Legal Obligations

CAR clarifies that the issuance of UIN and/ or UAOP by DGCA shall not confer any right on RPAs operator against the owner or resident of any land or building or over which the operations are conducted, or prejudice in any way the rights and remedies which a person may have in respect of any injury to persons or damage to property caused directly or indirectly by the RPA. Further, it shall not absolve the operator/ remote pilot from compliance with any other regulatory requirement, which may exist under the State or local law.


It is mandatory for all civil RPA operators to have insurance with the liability that they might incur for any damage to third party resulting from the accident/ incident.

Enforcement Action

In case of violation of provisions of this CAR/ approved operating conditions, the UIN/ UAOP issued by DGCA shall be suspended/ cancelled. Breach of compliance to any of the requirements and falsification of records/ documents shall attract penal action including imposition of penalties as per applicable provisions of the Indian Penal Code, 1860 (IPC) (such as sections 287, 336, 337, 338). Necessary actions will be taken as per relevant sections of the Aircraft Act 1934 / the Aircraft Rules 1937 or any statutory provisions.


While CAR is set to come into effect from December 1, 2018, it is likely to create doubts in the mind of RPA/ Drone users as to the complete understanding and compliance of the CAR to avoid Enforcement Action against them. Use of Drones is an important aspect in today's world and almost all major business entities require it for a purpose.

For infrastructure and real estate entities, use of drone is crucial at all times, especially during pre-tender survey in greenfield areas and due-diligence stage. Drones are also required to carry out and capture aerial survey of the progress of the works. While CAR makes it amply clear that there are no restrictions on Nano RPAs intended to fly upto 50 feet (15 m) above ground level in uncontrolled airspace/ enclosed premises for commercial / recreational / R&D purposes, Nano RPAs may not be sufficient enough to carry out all the requisite heavy duty recording and allied activities.

FAQs published by DGCA states that delivery of items is not allowed as of now under CAR even if flying below 50 feet. Another FAQ states that RPAs can be used for agricultural purpose except for the purpose of spraying pesticides until specifically cleared. RPAs if issued with UIN, cannot be transferred or disposed-off without permission from DGCA. It will be required to undergo process of cancellation of UIN and the subsequent buyer will have to apply for fresh UIN through Digital Sky Platform.

Several grey areas and doubts remain to be answered by DGCA and clearly, all entities will have to cautious and careful while using or engaging any entity to use drone facility for them. DGCA has imposed strict enforcement action in case of violation of CAR as well as penal action, as may be applicable.

We look forward for further updates on the subject from DGCA and shall update our esteemed readers in our upcoming newsletters.

The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.

To print this article, all you need is to be registered on

Click to Login as an existing user or Register so you can print this article.

Similar Articles
Relevancy Powered by MondaqAI
In association with
Related Topics
Similar Articles
Relevancy Powered by MondaqAI
Related Articles
Related Video
Up-coming Events Search
Font Size:
Mondaq on Twitter
Mondaq Free Registration
Gain access to Mondaq global archive of over 375,000 articles covering 200 countries with a personalised News Alert and automatic login on this device.
Mondaq News Alert (some suggested topics and region)
Select Topics
Registration (please scroll down to set your data preferences)

Mondaq Ltd requires you to register and provide information that personally identifies you, including your content preferences, for three primary purposes (full details of Mondaq’s use of your personal data can be found in our Privacy and Cookies Notice):

  • To allow you to personalize the Mondaq websites you are visiting to show content ("Content") relevant to your interests.
  • To enable features such as password reminder, news alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our content providers ("Contributors") who contribute Content for free for your use.

Mondaq hopes that our registered users will support us in maintaining our free to view business model by consenting to our use of your personal data as described below.

Mondaq has a "free to view" business model. Our services are paid for by Contributors in exchange for Mondaq providing them with access to information about who accesses their content. Once personal data is transferred to our Contributors they become a data controller of this personal data. They use it to measure the response that their articles are receiving, as a form of market research. They may also use it to provide Mondaq users with information about their products and services.

Details of each Contributor to which your personal data will be transferred is clearly stated within the Content that you access. For full details of how this Contributor will use your personal data, you should review the Contributor’s own Privacy Notice.

Please indicate your preference below:

Yes, I am happy to support Mondaq in maintaining its free to view business model by agreeing to allow Mondaq to share my personal data with Contributors whose Content I access
No, I do not want Mondaq to share my personal data with Contributors

Also please let us know whether you are happy to receive communications promoting products and services offered by Mondaq:

Yes, I am happy to received promotional communications from Mondaq
No, please do not send me promotional communications from Mondaq
Terms & Conditions (the Website) is owned and managed by Mondaq Ltd (Mondaq). Mondaq grants you a non-exclusive, revocable licence to access the Website and associated services, such as the Mondaq News Alerts (Services), subject to and in consideration of your compliance with the following terms and conditions of use (Terms). Your use of the Website and/or Services constitutes your agreement to the Terms. Mondaq may terminate your use of the Website and Services if you are in breach of these Terms or if Mondaq decides to terminate the licence granted hereunder for any reason whatsoever.

Use of

To Use you must be: eighteen (18) years old or over; legally capable of entering into binding contracts; and not in any way prohibited by the applicable law to enter into these Terms in the jurisdiction which you are currently located.

You may use the Website as an unregistered user, however, you are required to register as a user if you wish to read the full text of the Content or to receive the Services.

You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these Terms or with the prior written consent of Mondaq. You may not use electronic or other means to extract details or information from the Content. Nor shall you extract information about users or Contributors in order to offer them any services or products.

In your use of the Website and/or Services you shall: comply with all applicable laws, regulations, directives and legislations which apply to your Use of the Website and/or Services in whatever country you are physically located including without limitation any and all consumer law, export control laws and regulations; provide to us true, correct and accurate information and promptly inform us in the event that any information that you have provided to us changes or becomes inaccurate; notify Mondaq immediately of any circumstances where you have reason to believe that any Intellectual Property Rights or any other rights of any third party may have been infringed; co-operate with reasonable security or other checks or requests for information made by Mondaq from time to time; and at all times be fully liable for the breach of any of these Terms by a third party using your login details to access the Website and/or Services

however, you shall not: do anything likely to impair, interfere with or damage or cause harm or distress to any persons, or the network; do anything that will infringe any Intellectual Property Rights or other rights of Mondaq or any third party; or use the Website, Services and/or Content otherwise than in accordance with these Terms; use any trade marks or service marks of Mondaq or the Contributors, or do anything which may be seen to take unfair advantage of the reputation and goodwill of Mondaq or the Contributors, or the Website, Services and/or Content.

Mondaq reserves the right, in its sole discretion, to take any action that it deems necessary and appropriate in the event it considers that there is a breach or threatened breach of the Terms.

Mondaq’s Rights and Obligations

Unless otherwise expressly set out to the contrary, nothing in these Terms shall serve to transfer from Mondaq to you, any Intellectual Property Rights owned by and/or licensed to Mondaq and all rights, title and interest in and to such Intellectual Property Rights will remain exclusively with Mondaq and/or its licensors.

Mondaq shall use its reasonable endeavours to make the Website and Services available to you at all times, but we cannot guarantee an uninterrupted and fault free service.

Mondaq reserves the right to make changes to the services and/or the Website or part thereof, from time to time, and we may add, remove, modify and/or vary any elements of features and functionalities of the Website or the services.

Mondaq also reserves the right from time to time to monitor your Use of the Website and/or services.


The Content is general information only. It is not intended to constitute legal advice or seek to be the complete and comprehensive statement of the law, nor is it intended to address your specific requirements or provide advice on which reliance should be placed. Mondaq and/or its Contributors and other suppliers make no representations about the suitability of the information contained in the Content for any purpose. All Content provided "as is" without warranty of any kind. Mondaq and/or its Contributors and other suppliers hereby exclude and disclaim all representations, warranties or guarantees with regard to the Content, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. To the maximum extent permitted by law, Mondaq expressly excludes all representations, warranties, obligations, and liabilities arising out of or in connection with all Content. In no event shall Mondaq and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use of the Content or performance of Mondaq’s Services.


Mondaq may alter or amend these Terms by amending them on the Website. By continuing to Use the Services and/or the Website after such amendment, you will be deemed to have accepted any amendment to these Terms.

These Terms shall be governed by and construed in accordance with the laws of England and Wales and you irrevocably submit to the exclusive jurisdiction of the courts of England and Wales to settle any dispute which may arise out of or in connection with these Terms. If you live outside the United Kingdom, English law shall apply only to the extent that English law shall not deprive you of any legal protection accorded in accordance with the law of the place where you are habitually resident ("Local Law"). In the event English law deprives you of any legal protection which is accorded to you under Local Law, then these terms shall be governed by Local Law and any dispute or claim arising out of or in connection with these Terms shall be subject to the non-exclusive jurisdiction of the courts where you are habitually resident.

You may print and keep a copy of these Terms, which form the entire agreement between you and Mondaq and supersede any other communications or advertising in respect of the Service and/or the Website.

No delay in exercising or non-exercise by you and/or Mondaq of any of its rights under or in connection with these Terms shall operate as a waiver or release of each of your or Mondaq’s right. Rather, any such waiver or release must be specifically granted in writing signed by the party granting it.

If any part of these Terms is held unenforceable, that part shall be enforced to the maximum extent permissible so as to give effect to the intent of the parties, and the Terms shall continue in full force and effect.

Mondaq shall not incur any liability to you on account of any loss or damage resulting from any delay or failure to perform all or any part of these Terms if such delay or failure is caused, in whole or in part, by events, occurrences, or causes beyond the control of Mondaq. Such events, occurrences or causes will include, without limitation, acts of God, strikes, lockouts, server and network failure, riots, acts of war, earthquakes, fire and explosions.

By clicking Register you state you have read and agree to our Terms and Conditions