United States: CFTC Division Of Market Oversight Holds Roundtable To Assess The Made Available To Trade Process

Last Updated: July 22 2015
Article by Lamiya Rahman

Most Read Contributor in United States, July 2019

Introduction

On Wednesday, July 15, 2015, the Commodity Futures Trading Commission's ("CFTC") Division of Market Oversight ("DMO") hosted a public roundtable to discuss the process to determine whether a swap must be executed on an exchange. The roundtable assessed industry experience with the current process under the Commodity Exchange Act ("CEA") and compared approaches to mandatory exchange trading in other jurisdictions.

Under CEA Section 2(h)(8), if a swap is required to be cleared, then the swap must be executed on a designated contract market ("DCM") or swap execution facility ("SEF") to the extent the swap is "made-available-to-trade" ("MAT"). In 2013, the CFTC promulgated a rule governing the MAT process, authorizing any one DCM or SEF to make a determination, subject to CFTC review, that a swap or class of swaps must be traded on a DCM or SEF.1 In the two years since the rule's inception, the exchanges have made five MAT determinations, all in the credit default swap or interest rate swap asset classes.2

Commissioner Giancarlo, along with several other panelists, highlighted various shortcomings in the rule—chief among them that it unnecessarily restricts efficient trade execution. Commissioner Giancarlo encouraged roundtable participants to focus on the CFTC rule's restricting the manner of executing a swap on an exchange, rather than on who makes the MAT determination. Noting that the current CFTC rule requires swaps subject to mandatory exchange trading to be executed via order book or request for quote, Commissioner Giancarlo argued that the process creates unnecessary barriers to market entry. Participants that intend to execute a swap subject to a MAT determination must shoehorn their swaps into one of two execution methods and find a counterparty willing to do the same. Instead, Commissioner Giancarlo asserted that the rule should provide exchanges with the flexibility to offer a wide array of trade execution methods that best serve the needs of each swap. "Flexible methods of execution would open U.S. swaps markets to promising technological advances and further Congress' goals of promoting the trading of swaps on SEFs and pre-trade price transparency."3

Industry Assessment of the MAT Process

Following Commissioner Giancarlo's cue, industry participants—including SEFs, trade associations, liquidity providers, and buy-side firms—weighed in on the effectiveness of the MAT determination process. Although they agreed that the MAT process has been measured in pace and collaborative, they highlighted ongoing gaps and the need to change existing CFTC rules.

Factors to Consider to Make a Swap Available to Trade

Under Parts 37 and 38 of the CFTC rule, a DCM or SEF may base its decision on any of the following: (1) Whether there are ready and willing buyers and sellers; (2) the frequency or size of transactions; (3) the trading volume; (4) the number and types of market participants; (5) the bid/ask spread; or (6) the usual number of resting firm or indicative bids or offers. However, as several panelists pointed out, SEFs and DCMs consider more than one factor when making a MAT determination. Therefore, allowing a decision to be based on any one factor, as the rule currently provides, is not in line with industry practice.

Separately, panelists agreed that other factors should be considered before making a swap available to trade. For example, the CFTC, SEFs, and DCMs consider the technological readiness of all market participants. SEF panelists noted that they have limited their MAT submissions to date where dealers and buy-side participants may not have the requisite capabilities to trade on a facility. Similarly, representatives from asset management firms and swap dealers stressed that even if a SEF or DCM is technologically ready to make a swap available to trade, the rest of the market will require significant time and resources to ensure connectivity and compliance with the relevant platforms' rules. Nonetheless, the technological readiness for the market to move to the required exchange trading methodologies (i.e., order book and request for quote) is not a factor in the CFTC's current MAT process.

Finally, several panelists urged the CFTC to adopt quantitative factors to ensure that MAT determinations are made on an objective basis. One industry panelist proposed minimum thresholds, such as a requirement that at least two SEFs offer the swap and at least two liquidity providers deal in the swap. The panelists agreed that any quantitative thresholds should be predicated on a universally accepted set of market-wide swaps data.

Process for Making MAT Determinations

Several panelists emphasized the need for greater CFTC involvement. Representatives from two asset management firms took exception to the current self-certification process, which allows a DCM or SEF to make a MAT determination on an expedited basis. These panelists feared that the expedited process may be too quick for market participants to assess and prepare for compliance. Some participants suggested a process akin to the mandatory clearing determination, which allows a derivative clearing organization ("DCO") or the CFTC to make a mandatory clearing determination.

Representatives from certain SEFs were amenable to expanding the MAT process to other parties, with one panelist supporting a CFTC-led process and another suggesting that other market participants, in addition to SEFs, be permitted to submit MAT applications. Another panelist recommended the use of advisory committees comprised of market professionals to help evaluate MAT submissions. One panelist further suggested amending the MAT rule to incorporate a formalized public comment process. Across the board, the panelists agreed that all relevant parties—including SEFs/DCMs, the CFTC, and market participants—should play a role in assessing whether a swap must be executed on an exchange.

Panelists also addressed the need to create a process to undo a MAT determination. For example, if the CFTC were to adopt quantitative factors for making MAT determinations, one panelist argued that the CFTC could easily determine that a swap should no longer be subject to the mandatory exchange trading requirement.

Conflicts of Interest in the MAT Process?

During the panel discussion, several academic panelists emphasized that exchanges face a conflict of interest under the CFTC's MAT process because the exchanges benefit from a requirement to execute a swap on a DCM or SEF. To prevent this conflict of interest, the academic panelists supported the CFTC making MAT determinations. However, several speakers, including some industry panelists, expressed optimism about the exchanges' use of the MAT process. These speakers believed the conflict of interest concerns may have been overstated.

Mandatory Trade Execution in Japan and the European Union

Representatives from Japan and the European Union ("EU") discussed their efforts to adopt more flexible regulatory frameworks driven by market principles rather than artificial regulatory prescriptions. For example, the EU's final trade execution regime will not impose arbitrary limits on execution methods by its exchanges. Moreover, both jurisdictions will implement a transparent process to prevent arbitrary or self-serving decisions and will seek market input to ensure that all issues are adequately considered. Several panelists urged the CFTC to develop a similarly flexible process to prevent a "liquidity flight" overseas.

Conclusion

The CFTC's roundtable highlighted several gaps in the MAT process from the perspective of various market participants, including SEFs, swap dealers, and end-users. Accordingly, this roundtable may trigger further rulemaking from the CFTC to modify the agency's implementation of the exchange trading requirement in the CEA. In connection with the roundtable, market participants may submit comments on the topics discussed during the roundtable by Friday, August14, 2015.

Footnotes

1 See Process for a Designated Contract Market or Swap Execution Facility To Make a Swap Available to Trade, Swap Transaction Compliance and Implementation Schedule, and Trade Execution Requirement Under the Commodity Exchange Act, Final Rule, 78 Fed. Reg. 33606 (June 4, 2013).

2 CFTC, Swaps Made Available to Trade Determination, available at http://sirt.cftc.gov/sirt/sirt.aspx?Topic=%20SwapsMadeAvailableToTradeDetermination.

3 Statement of Commissioner J. Christopher Giancarlo on the DMO Made Available to Trade Process Roundtable (July 14, 2015).

The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.

To print this article, all you need is to be registered on Mondaq.com.

Click to Login as an existing user or Register so you can print this article.

Authors
Similar Articles
Relevancy Powered by MondaqAI
Cadwalader, Wickersham & Taft LLP
 
In association with
Related Topics
 
Similar Articles
Relevancy Powered by MondaqAI
Cadwalader, Wickersham & Taft LLP
Related Articles
 
Related Video
Up-coming Events Search
Tools
Print
Font Size:
Translation
Channels
Mondaq on Twitter
 
Mondaq Free Registration
Gain access to Mondaq global archive of over 375,000 articles covering 200 countries with a personalised News Alert and automatic login on this device.
Mondaq News Alert (some suggested topics and region)
Select Topics
Registration (please scroll down to set your data preferences)

Mondaq Ltd requires you to register and provide information that personally identifies you, including your content preferences, for three primary purposes (full details of Mondaq’s use of your personal data can be found in our Privacy and Cookies Notice):

  • To allow you to personalize the Mondaq websites you are visiting to show content ("Content") relevant to your interests.
  • To enable features such as password reminder, news alerts, email a colleague, and linking from Mondaq (and its affiliate sites) to your website.
  • To produce demographic feedback for our content providers ("Contributors") who contribute Content for free for your use.

Mondaq hopes that our registered users will support us in maintaining our free to view business model by consenting to our use of your personal data as described below.

Mondaq has a "free to view" business model. Our services are paid for by Contributors in exchange for Mondaq providing them with access to information about who accesses their content. Once personal data is transferred to our Contributors they become a data controller of this personal data. They use it to measure the response that their articles are receiving, as a form of market research. They may also use it to provide Mondaq users with information about their products and services.

Details of each Contributor to which your personal data will be transferred is clearly stated within the Content that you access. For full details of how this Contributor will use your personal data, you should review the Contributor’s own Privacy Notice.

Please indicate your preference below:

Yes, I am happy to support Mondaq in maintaining its free to view business model by agreeing to allow Mondaq to share my personal data with Contributors whose Content I access
No, I do not want Mondaq to share my personal data with Contributors

Also please let us know whether you are happy to receive communications promoting products and services offered by Mondaq:

Yes, I am happy to received promotional communications from Mondaq
No, please do not send me promotional communications from Mondaq
Terms & Conditions

Mondaq.com (the Website) is owned and managed by Mondaq Ltd (Mondaq). Mondaq grants you a non-exclusive, revocable licence to access the Website and associated services, such as the Mondaq News Alerts (Services), subject to and in consideration of your compliance with the following terms and conditions of use (Terms). Your use of the Website and/or Services constitutes your agreement to the Terms. Mondaq may terminate your use of the Website and Services if you are in breach of these Terms or if Mondaq decides to terminate the licence granted hereunder for any reason whatsoever.

Use of www.mondaq.com

To Use Mondaq.com you must be: eighteen (18) years old or over; legally capable of entering into binding contracts; and not in any way prohibited by the applicable law to enter into these Terms in the jurisdiction which you are currently located.

You may use the Website as an unregistered user, however, you are required to register as a user if you wish to read the full text of the Content or to receive the Services.

You may not modify, publish, transmit, transfer or sell, reproduce, create derivative works from, distribute, perform, link, display, or in any way exploit any of the Content, in whole or in part, except as expressly permitted in these Terms or with the prior written consent of Mondaq. You may not use electronic or other means to extract details or information from the Content. Nor shall you extract information about users or Contributors in order to offer them any services or products.

In your use of the Website and/or Services you shall: comply with all applicable laws, regulations, directives and legislations which apply to your Use of the Website and/or Services in whatever country you are physically located including without limitation any and all consumer law, export control laws and regulations; provide to us true, correct and accurate information and promptly inform us in the event that any information that you have provided to us changes or becomes inaccurate; notify Mondaq immediately of any circumstances where you have reason to believe that any Intellectual Property Rights or any other rights of any third party may have been infringed; co-operate with reasonable security or other checks or requests for information made by Mondaq from time to time; and at all times be fully liable for the breach of any of these Terms by a third party using your login details to access the Website and/or Services

however, you shall not: do anything likely to impair, interfere with or damage or cause harm or distress to any persons, or the network; do anything that will infringe any Intellectual Property Rights or other rights of Mondaq or any third party; or use the Website, Services and/or Content otherwise than in accordance with these Terms; use any trade marks or service marks of Mondaq or the Contributors, or do anything which may be seen to take unfair advantage of the reputation and goodwill of Mondaq or the Contributors, or the Website, Services and/or Content.

Mondaq reserves the right, in its sole discretion, to take any action that it deems necessary and appropriate in the event it considers that there is a breach or threatened breach of the Terms.

Mondaq’s Rights and Obligations

Unless otherwise expressly set out to the contrary, nothing in these Terms shall serve to transfer from Mondaq to you, any Intellectual Property Rights owned by and/or licensed to Mondaq and all rights, title and interest in and to such Intellectual Property Rights will remain exclusively with Mondaq and/or its licensors.

Mondaq shall use its reasonable endeavours to make the Website and Services available to you at all times, but we cannot guarantee an uninterrupted and fault free service.

Mondaq reserves the right to make changes to the services and/or the Website or part thereof, from time to time, and we may add, remove, modify and/or vary any elements of features and functionalities of the Website or the services.

Mondaq also reserves the right from time to time to monitor your Use of the Website and/or services.

Disclaimer

The Content is general information only. It is not intended to constitute legal advice or seek to be the complete and comprehensive statement of the law, nor is it intended to address your specific requirements or provide advice on which reliance should be placed. Mondaq and/or its Contributors and other suppliers make no representations about the suitability of the information contained in the Content for any purpose. All Content provided "as is" without warranty of any kind. Mondaq and/or its Contributors and other suppliers hereby exclude and disclaim all representations, warranties or guarantees with regard to the Content, including all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement. To the maximum extent permitted by law, Mondaq expressly excludes all representations, warranties, obligations, and liabilities arising out of or in connection with all Content. In no event shall Mondaq and/or its respective suppliers be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use of the Content or performance of Mondaq’s Services.

General

Mondaq may alter or amend these Terms by amending them on the Website. By continuing to Use the Services and/or the Website after such amendment, you will be deemed to have accepted any amendment to these Terms.

These Terms shall be governed by and construed in accordance with the laws of England and Wales and you irrevocably submit to the exclusive jurisdiction of the courts of England and Wales to settle any dispute which may arise out of or in connection with these Terms. If you live outside the United Kingdom, English law shall apply only to the extent that English law shall not deprive you of any legal protection accorded in accordance with the law of the place where you are habitually resident ("Local Law"). In the event English law deprives you of any legal protection which is accorded to you under Local Law, then these terms shall be governed by Local Law and any dispute or claim arising out of or in connection with these Terms shall be subject to the non-exclusive jurisdiction of the courts where you are habitually resident.

You may print and keep a copy of these Terms, which form the entire agreement between you and Mondaq and supersede any other communications or advertising in respect of the Service and/or the Website.

No delay in exercising or non-exercise by you and/or Mondaq of any of its rights under or in connection with these Terms shall operate as a waiver or release of each of your or Mondaq’s right. Rather, any such waiver or release must be specifically granted in writing signed by the party granting it.

If any part of these Terms is held unenforceable, that part shall be enforced to the maximum extent permissible so as to give effect to the intent of the parties, and the Terms shall continue in full force and effect.

Mondaq shall not incur any liability to you on account of any loss or damage resulting from any delay or failure to perform all or any part of these Terms if such delay or failure is caused, in whole or in part, by events, occurrences, or causes beyond the control of Mondaq. Such events, occurrences or causes will include, without limitation, acts of God, strikes, lockouts, server and network failure, riots, acts of war, earthquakes, fire and explosions.

By clicking Register you state you have read and agree to our Terms and Conditions